1Mii B10 User Manual

B10 User Guide
Get paired with your PC/Mac
1.Plug B10 into USB port on your PC/Mac.
2.Press and hold the multi-function button on B10 for 2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
3.Please ensure your Bluetooth headphone in paring mode.
4.Get your Bluetooth headphone close to B10 audio adapter to complete paring(the LED
indicator will stay on).
Use Microphone on your Bluetooth headphone
Double click the multi-function button on B10 to ENTER the "Hands free/Call mode(the
LED indicator start pulsing blue every 3 seconds)" to use the Microphone. After using
the Microphone, please double click the multi-function button to EXIT the"Hands free/Call
mode".(Note:Hands Free/call mode DOES NOT SUPPORT aptX LL & HD)
How to connect two Bluetooth headphones via B10?
1.Plug B10 into USB2.0 or USB3.0 port on your PC/Mac.
2.Press and hold the multi-function button on B10 for2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
3.Please ensure your Bluetooth headphone in paring mode.
4.Get your Bluetooth headphone close to B10 audio adapter to complete paring(the LED
indicator will stay on).
5.Ensure your second Bluetooth headphone in paring mode.
6.Press and hold the multi-function button on B10 for2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
7.Get your second Bluetooth headphone close to B10 audio adapter to complete
paring(the LED indicator will stay on).
Status
LED indicator
Pairing mode
LED alternatively flash blue and red
Connected with aptX-
HD codec
LED stay green
Connected with aptX-
LL codec
LED stay white
Connected with aptX-
codec
LED stay cyan
Connected with fast
stream codec
LED stay yellow
Connected with SBC
LED stay blue
Disconnected
LED flash once every 3 seconds
Connected 2 devices
LED stay purple
Call mode
LED indicator pulse Blue every 3 seconds

1Mii B10 Specifications

General

Brand	1Mii
Model	B10
Category	Adapter
Language	English