(7)How to install CM-06DNslCM-06DNs4 door station,
Contents
(])Iron door
<DBottomframe
®Door
station
<1'>3
x 8 screw
1, System Introduction
······1
2,
System Pleture-: 1
3,
System Diagram 2
4,
System Wiring 3
S, System Operation Instruction..
····
9
6, Apparatus Structure and Functions..
··········
···············
14
7,
System Components
and
Parameters-
21
8, Wire Matertat- 22
9, Installation Instructions······
······
22
Installation steps on iron door:
(I
)Drill 4 holes at the properposition on door according to the correct installation
dimension,
(2)Dismantle the
hack
cover
of
door station
and
fix
it on iron door hy screws.
(3)From the npside
ofhack
cover
pnt
door station in
hack
cover, pnsh the door
station tightly in the
hack
cover from downside
of
doorstation, and
fix
the
doorstation to the
hack
cover at downside
of
doorstation hy screw
of
3 X 8.
Installation steps on wall:
(I )Drill 4 holes
of
<!>
6 at the proper positionon wall.
(2)Dismantle the
hack
cover
of
door station, and
fix
the
hack
coverby additional
plastic pipes and
<!>
4.2 X
40mm
screws on wall install the
back
cover
of
door
station on wall
first.
(3)From the npside
ofbeck
cover
put
door station in
back
cover,
pnsh
the door
station tightly in the
back
cover from downside
of
doorstation, and
fix
the
doorstation to the
hack
cover at downside
of
doorstation by screw
of
3 X 8.
(8)Cautions for door station installation,
(I )Whenemhed
back
cover
of
door
station, please
pay
attention to depth
ofbeck
cover, which should be embeddedon door or wall. The outside part
of
door station
shonld be tightly elose to the horizontal snrface
of
door or wall, large interval
between door station outside
part
and
iron dooror wall shonld be avoided.
(2)000r
station shonld bemouoted flush on burgiar gnard door.
(3)00
not
instali underrain, moist, hightemperatore, dnsty
or
caustic conditions.
(5)Instal1ation height:depends on the average statore
ofthe
localpeople.
> <
To Next Page
Loading...
Need help?
General
