ABB Endura AZ series User Manual

—
ABB MEASUREMENT & ANALYTICS | USER GUIDE | IM/AZ20E-EN REV. F
Endura AZ series integral and remote transmitter
Combustion oxygen monitor
Measurement made easy
—
Superior technology
and quality
from the world
leader in oxygen
measurement
Introduction
The Endura AZ20 is the latest in a long
line of high-quality, combustion gas
analyzers from ABB.
The sensor, based on a zirconium oxide
cell, is mounted at the tip of the probe
that is inserted in the flue duct. The
resulting direct, in situ measurement
provides accurate and rapid oxygen
reading for combustion control
optimization and emissions monitoring.
For more information
Further publications for the Endura AZ series
analyzers are available for free download from:
www.abb.com/measurement
or by scanning this code:
Search for or click on
Data sheet
Endura AZ20 oxygen monitor
Combustion gas analysis
DS/AZ20-EN
Data sheet
Endura AZ25 oxygen analyzer
Combustion gas analysis
DS/AZ25-EN
Maintenance guide
Endura AZ20 series probe
Combustion oxygen monitor
IM/AZ20M-EN
User guide
Endura AZ20 series probe
Combustion oxygen monitor
IM/AZ20P-EN
User guide
Endura AZ25 series probe
Combustion oxygen monitor
OI/AZ25P-EN
This User Guide is intended for use on the
following analyzer systems:
• Endura AZ10
• Endura AZ20
• Endura AZ25

ABB Endura AZ series Specifications

General

Brand	ABB
Model	Endura AZ series
Category	Measuring Instruments
Language	English