ABB IRB 260 User Manual

1 Safety
1.2.2.2. Safety risks related to tools/workpieces
173HAC026048-001 Revision: A
© Copyright 2006-2008 ABB. All rights reserved.
1.2.2.2. Safety risks related to tools/workpieces
Safe handling
It must be possible to safely turn off tools, such as milling cutters, etc. Make sure that guards
remain closed until the cutters stop rotating.
It should be possible to release parts by manual operation (valves).
Safe design
Grippers/end effectors must be designed so that they retain workpieces in the event of a power
failure or a disturbance of the controller.
CAUTION!
Ensure that a gripper is prevented from dropping a workpiece, if such is used.

ABB IRB 260 Specifications

General

Brand	ABB
Model	IRB 260
Category	Robotics
Language	English