2
RELIAGEAR LIGHTING PANELBOARDS - RELIAGEAR PRO-STOCK NEMA 1 INTERIORS
1TQC213000Z0013,DEH40039,JAN2020
—
ABB Inc.
305 Gregson Drive
Cary, NC 27511
©Copyright 2020 ABB. All rights reserved.
Information provided is subject to change without notice. Please verify all details with ABB. All values are design or typical
values when measured under laboratory conditions, and ABB makes no warranty or guarantee, express or implied, that such
performance will be obtained under end-use conditions.
ReliaGear and Pro-Stock are registered trademarks of ABB Inc.
GE is a registered trademark used under license from General Electric company.
electrification.us.abb.com
Figure 1. Installation of a ReliaGear Pro-Stock interior into a ReliaGear lighting panelboard.
Figure 1. Installation d’un intérieur ReliaGear Pro-Stock dans un panneau d’éclairage ReliaGear.
Position A
Box mounting holes
Ouvertures de montage
de la boite
Interior mounting screws
(position B)
vis de montage de l'interieur
Interior mounting screws
(position C)
is de montage de l'interieur
—
01 Installation of a
ReliaGear® Merchandised
interior into a ReliaGear
lighting panelboard.
—
01
1TQC213000Z0013,DEH40039 July 2023
—
We reserve the right to make technical
changes or modify the contents of this
document without prior notice. With regard
to purchase orders, the agreed particulars
shall prevail. ABB Inc. does not accept any
responsibility whatsoever for potential
errors or possible lack of information in
this document.
We reserve all rights in this document
and in the subject matter and illustrations
contained therein. Any reproduction,
disclosure to third parties or utilization
of its
contents – in whole or in parts – is
forbidden
without prior written consent
of ABB Inc. Copyright© 2023 ABB
All rights reserved
—
ABB Inc.
305 Gregson Drive
Cary, NC 27511
electrification.us.abb.com
electrification.us.abb.com