To Next Page

To Previous Page

ABB 37

Motor Protection

REM615 ANSI

Product Version 2.0

1MAC251744 -PG Rev. A

Issued: 03.01.2010

25. Tools

 e relay is delivered as a pre-con gured unit.  e default

parameter setting values can be changed from the front-

panel user interface, the web-browser based user interface

(WHMI) or the PCM600 tool in combination with the

relay speci c connectivity package (CP).

PCM600 o ers extensive relay con guration functions

such as relay signal con guration using the signal matrix

tool, and IEC 61850 communication configuration

including horizontal relay-to-relay communication,

GOOSE.

When the web-browser based user interface is used, the

relay can be accessed either locally or remotely using a

web browser (IE 6.0 or later). For security reasons, the

web-browser based user interface is disabled by default.

 e interface can be enabled with the PCM600 tool or

from the front panel user interface.  e functionality of

the interface can be limited to read-only access by means

of PCM600.

Con guration, setting and SA system tools Version

PCM600 2.1 or later

Web-browser based user interface IE 7.0 or later

REM615 Connectivity Package 2.0 or later

COM600 substation product V3.4 or later

MicroSCADA Pro Substation Automation system 9.2 SP1 or later

Table 71. Tools

Questions and Answers:

Need help?

Do you have a question about the ABB REM615 ANSI and is the answer not in the manual?

ABB REM615 ANSI Specifications

General