Parameter Specification
IK rating according to IEC 62262 (enclo-
sure and display)
IK10
IK8+ for an operation temperature between
-35 and -30 °C
EMC rating IEC 61851-21-2, EN 61000-6-1, EN
61000-6-2, EN 61000-6-3, EN 61000-6-4, EN
61000-3-2, EN 61000-3-3, EN 61000-3-11,
EN 61000-3-12 CE RED- WLAN / RFID / E-
UTRA: EN 300 328 V2.1.1, EN 300 330
V2.1.1, EN 301 908-1 V11.1.2, EN 301
908-13 EN 50470-1, EN 50470-3 FCC Part 15
Class B
11.6 Required tools for installation
Parameter Specifications
Hammer -
Spirit level -
Drill -
Torque screw driver, cross -
Torque screw driver, slotted For terminal blocks and plugs with 5 mm
pitch
11.7 Ambient conditions
Parameter Value
Operation temperature -35°C to +50°C
Storage temperature -40°C to +80°C
Storage conditions Indoor, dry
Relative humidity <95%, non-condensing
11.8 Requirements for the wall
Parameter Value
Wall thickness Minimum 89 mm (3.5 inches)
Wall strength The wall must be serviceable for the items
listed below:
1. The weight of the EVSE. Refer to sec-
tion
11.5
.
2. The torque for the lower mounting
screws. Refer to section
11.16
.
Technical data
48 BCM.V3Y01.0-EN | 001
To Next Page
Loading...
Need help?
General
