ABB Terra AC Series User Manual

Parameter Specifications
Wire size for the terminal block plug (rec-
ommended)
24 AWG (0.5 mm
2
) minimum
Required torque 0.5 Nm
Strip length 5 mm
Terminal connections
• PE/Shield: Contact input terminal 1 or 2
• Configuration input: Contact input ter-
minal 2 or 1
Wire AWG and cross section: based on a copper wire type
11.13.6 Dry contacts output
The dry contacts input is the single contact in the EVSE.
Parameter Specifications
EVSE connector type Terminal block plug and screws
Wire size for the terminal block plug (al-
lowed maximum)
• 2.5 - 0.5 mm
2
(Europe)
• 12 - 30 AWG (North America)
Wire size for the terminal block plug (rec-
ommended)
20 AWG (0.75 mm
2
) minimum
Required torque 0.5 Nm
Strip length 5 mm
Terminal connections
• Configuration output dry contact 1:
Contact output terminal 1
• Configuration output dry contact 2:
Contact output terminal 2
Contact rated load 125 VAC/30VDC at 3A
The wire AWG and cross section are based on a copper wire type.
11.13.7 EV charge cable specifications
Parameter Value [mm]
Length 508
11.14 AC output specifications
11.14.1 AC output specifications (Europe)
Parameter Specification
AC output voltage range (1 phase) 220 - 240V AC
AC output voltage range (3 phase) 380 - 415V AC
Technical data
56 BCM.V3Y01.0-EN | 001

ABB Terra AC Series Specifications

General

Output Power	up to 22 kW
Max Output Current	32 A
Cooling Method	Natural convection
Connector Types	Type 2
Communication Protocols	OCPP 1.6
Installation	Wall or pole mounting
Communication Interface	Ethernet, Wi-Fi
Enclosure Rating	IP54
Operating Temperature	-30°C to +50°C
Efficiency	98%