EasyManuals Logo

ABB TPL73-B12 User Manual

ABB TPL73-B12
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
Operation Manual / TPL73-B.. - 85-B11/ -B12
10 Preserving turbocharger / 10.2 Taking out of operation for more
than 12 months
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
10.2 Taking out of operation for more than 12
months
If the engine is taken out of service, the following can be done with the
turbocharger:
¡ The turbocharger remains mounted on the engine.
¡ The turbocharger casing remains mounted on the engine, but the ro-
tor and the bearing parts are removed and stored separately.
¡ The turbocharger is removed completely, either as a whole or in indi-
vidual parts.
See the section Taking out of operation for up to 12 months, under
Mothballing measures, for the measures always necessary when moth-
balling turbocharger parts.
If the turbocharger remains mounted on the engine, refer to the section
Taking out of operation for up to 12 months, under Rotating the rotor in
stack draught.
If the entire turbocharger is removed or if the turbocharger is re-as-
sembled next to the engine using the individual parts:
u Close all turbocharger openings using wooden covers and paraffin
paper.
Suitable storage locations are only dry rooms where the relative humid-
ity is between 40 to 70 % and no condensation can form.
Condition of the mothballed turbocharger
u Check the mothballed turbocharger parts for corrosion every year.
u If there are signs of rust: Clean parts thoroughly and renew protection
against corrosion.
Page 143 / 151

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB TPL73-B12 and is the answer not in the manual?

ABB TPL73-B12 Specifications

General IconGeneral
BrandABB
ModelTPL73-B12
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals