—
ABB MEASUREMENT & ANALYTICS | OPERATING INSTRUCTION
VA Master FAM540
Metal Cone Variable Area Flowmeter
—
ABB Limited
Measurement & Analytics
Howard Road, St. Neots
Cambridgeshire, PE19 8EU
UK
Tel: +44 (0)870 600 6122
Fax: +44 (0)1480 213 339
Email: enquiries.mp.uk@gb.abb.com
ABB Automation Products GmbH
Measurement & Analytics
Schillerstr. 72
32425 Minden
Germany
Tel: +49 571 830-0
Fax: +49 571 830-1806
abb.com/flow
ABB Inc.
Measurement & Analytics
125 E. County Line Road
Warminster, PA 18974
USA
Tel: +1 215 674 6000
Fax: +1 215 674 7183
Device firmware: Version B.20 or
higher
Measurement made easy
OI/FAM540-EN Rev. E 08.2019
—
FAM540
Introduction
Metal cone variable area flowmeter for the
measurement of the flow rate of operating
volume or mass flow units (at constant pressure /
temperature), if a physical mass flow unit has
been selected.
Additional Information
Additional documentation on VA Master FAM540 is
available for download free of charge at
www.abb.com/flow.
Alternatively simply scan this code:
—
We reserve the right to make technical changes or modify the contents of this document
without prior notice. With regard to purchase orders, the agreed particulars shall prevail.
ABB does not accept any responsibility whatsoever for potential errors or possible lack of
information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained
therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole
or in parts – is forbidden without prior written consent of ABB.
© ABB 2019 3KXF154001R4201
To Next Page
Need help?
General
