Accu-Chek Guide makes things much easier.
Testing for blood glucose
Removing the test strip
Push a test strip upwards with slight pressure from the
front or back. With this test strip you can also touch the
upper side.
1
Inserting a test strip
Insert the test strip into the test strip slot in the
direction of the arrow. If you switch on the device
beforehand, you will automatically activate illumination.
2
Applying blood
Touch the drop of blood with the yellow edge of the test
strip and wait until the "Measurement in progress"
message appears.
Ejecting the test strip
Remove the test strip by activating the test strip ejector
button or by pulling the test strip out.
3
4
For further instructions on handling
please watch the product video at
www.accu-chek.de/guide or read the
package insert.
Buttons for menu
navigation
Test strip ejector
button
Test strip slot
ON/OFF
button
Englisch
To Next Page
Need help?
General
