Accu-Chek Nano Getting Started Guide

www.accu-chek.com.au
Accu-Chek Enquiry Line: 1800 251 816
Performa
Accu-Chek
®
Performa
Move into the shade or shield
the meter with your body,
for example.
Repeat the test.
Move to a place where the
ambient temperature is not
higher than +40 °C and wait
for the temperature of the
meter to adjust to this temperature.
Do not apply blood or control
solution to the test area until the
prompt apply drop is displayed.
Repeat the test.
Insert two new batteries.
Move to a place where the
ambient temperature is at
least +10 °C and wait for the
temperature of the meter to
adjust to this temperature.
Error Messages - Accu-Chek
®
Mobile
If the error message is displayed
after turning the meter on again:
Contact the Accu-Chek Enquiry Line on 1800 251 816.
10 11

Accu-Chek Nano Specifications

General

Display Type	LCD
Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	500 results
Automatic Power Off	Yes
Memory	500 results
Dimensions	69 x 43 x 20 mm
Weight	40 g with batteries
Measuring Range	0.6 - 33.3 mmol/L
Operating Conditions	10 - 90% relative humidity