Acer B246HL User Manual

ACER B246HL
15
(HDMI/DP Mode)
Problems
Current Status
Remedy
No Picture
LED ON
 Using OSD, adjust brightness and contrast to
maximum or reset to their default settings.
LED OFF
 Check the power switch.
 Check if AC power cord is properly connected
to the monitor.
LED displays
amber color
 Check if video signal cable is properly
connected at the back of monitor.
 Check if the power of computer system is ON.
Abnormal
Sound
(Only
Audio-Input
model)
(Optional)
No sound, or
sound level is too
low
 Check the audio cable with the host PC is
connected.
 Check if the volume setup of the host PC is in
minimum position and try to raise the volume
level.

Acer B246HL Specifications

General

3D	No
Panel type	VA
Aspect ratio	16:9
Response time	6 ms
Display diagonal	24 \
Display technology	LED
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	-
HDCP	Yes
HDMI ports quantity	0
Product color	Gray
Tilt angle range	-5 - 35 °
Panel mounting interface	- mm
AC input voltage	110 - 220 V
Energy efficiency scale	A to G
Power consumption (off)	0.3 W
Power consumption (standby)	0.5 W
Power consumption (typical)	22.1 W
Sustainability certificates	EPEAT Gold
Cables included	DVI, VGA

Weight and Dimensions

Depth (with stand)	221.2 mm
Height (with stand)	535.5 mm
Weight (with stand)	6100 g
Depth (without stand)	52 mm
Width (without stand)	567 mm
Height (without stand)	335.9 mm
Weight (without stand)	3440 g