English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1 To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.•
2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this
range may result in permanent damage.
6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.•
The LCD monitor or case is damaged.•
Package contents
LCD monitor
AC Power cable
DVI cable
(Optional)
VGA cable
HDMI cable
(Optional)
AC Adapter
User guide
Quick start
guide
Attaching the monitor to the base
1 Remove the monitor base from the packaging and place it on a stable and level workspace.
2 Remove the monitor from the packaging.
3 Attach the monitor stand arm to the base.
Ensure that the base is locked onto the monitor stand arm. (for selected models)•
Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin. (for
•
selected models)
Connecting your monitor to a computer
1 Turn off your computer and unplug your computer’s power cord.
2 Connect the signal cable to the VGA and/or DVI-D (optional) and/or
HDMI (optional) input socket of the monitor, and the VGA and/or DVI-D
(optional) and/or HDMI (optional) output socket of the graphics card
on the computer. Then tighten the thumbscrews on the signal cable
connector.
3 Connect one end of the adapter to the monitor and the other end to a
properly grounded, AC outlet.
4 Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
Panel controls
No. Item Description
1 Power button /
indicator
Turns the monitor on/off. Blue indicates power
on. Blinking blue indicates standby / power
saving mode.
2
< / > button Press the < / > button to navigate to the desired
function or to change the settings of the current
function.
3 Menu / Enter
button
Press to view the OSD menu. Press it again to
enter a selection in the OSD menu.
4 Auto / Exit
button
When the OSD menu is active, press this •
button to exit the OSD menu.
When the OSD menu is inactive, press •
this button to activate the Auto Adjustment
function.
5 Empowering
Key
Press this button to open the Acer eColor
Management OSD and access the scenario modes.
To Next Page
Need help?
General
Weight and Dimensions
