AEG L6FBK841B User Manual

4. Connect the water inlet hose to the
cold water tap with 3/4'' thread.
WARNING!
The inlet water shall not
exceed 25 °C.
Water drainage
The drain hose should stay at a height of
no less than 60 cm and not more than
100 cm.
You can extend the drain
hose to maximum 400 cm.
Contact the authorised
service centre for the other
drain hose and the
extension.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when the
appliance drains and the
drain hose end is not
immersed in the water.
There may be a return of
dirty water into the
appliance.
3. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
4. To a stand pipe with vent hole - Insert
the drain hose directly into a drain pipe.
Refer to the illustration.
www.aeg.com10

AEG L6FBK841B Specifications

General

Door hinge	Left
Water fill	Cold
Cord length	1.8 m
Control type	Buttons, Rotary
Display type	LED
Door opening	Side opening
Loading type	Front-load
Drum material	Stainless steel
Product color	White
Built-in display	Yes
Country of origin	Poland
Inlet hose length	1.3 m
Illumination color	Red
Outlet hose length	1.45 m
Appliance placement	Freestanding
Self-cleaning	-
Drum capacity	8 kg
Maximum spin speed	1400 RPM
Noise level (wash)	75 dB
Number of washing programs	14
Current	13 A
Connected load	1900 W
AC input voltage	230 - 240 V
AC input frequency	50 Hz
Water consumption per cycle	43 L
Package depth	635 mm
Package width	640 mm
Package height	900 mm
Package weight	71000 g
Intrastat code	84501190

Weight and Dimensions

Depth	547 mm
Width	596 mm
Height	847 mm
Weight	69500 g