AERMEC VMF-E2 User Manual

9
AVMFE2 1606 - 6795750_01
20°C
12°C
28°C
C D
C
D
25°C
33°C17°C
12°C
12°C
12°C
C D
20°C
12°C
28°C
C D
C
D
22°C
30°C14°C
12°C
12°C
12°C
C D
+
-
AUX
– (A) Ventilation speed selector:
• OFF The anti-freeze function
is active
• AUTO Automatic ventilation
mode
• Manual ventilation speed
selection
V1 = Minimum speed
V2 = Average speed
V3 = Maximum speed
• AUX Minimum speed
Special accessories enabling,
consult the relative manuals.
CONTROL PANEL FUNCTIONS
FROST PROTECTION
HEATING COOLING
FROST PROTECTION:
HEATING COOLING
Temperature
standard
configuration
(dead band 5°C)
Temperature
optional
configuration
(dead band 2°C)
(A)
(B)
(D)
(C)
– (D) Ventilation request
indicator light
YELLOW
– (B) Temperature selector
– (C) Operation mode
indicator light
RED - BLUE - FUCHSIA
Ventilation is only allowed with the fin open; it must be manually opened.
The closure of the fin causes ventilation to switch off. To access the control panel, lift the protection flap. Closing the master fan
coil fin, the electronic thermostat card and the other fan coils in the network will carry on working.
FCX FCZ
OPEN
CLOSE

AERMEC VMF-E2 Specifications

General

Protection Degree	IP30
Power Consumption	5 VA
Operating Temperature	0°C to 40°C
Storage Temperature	-20 °C to 70 °C
Relative Humidity	5% to 95% non-condensing
Communication	Modbus RTU
Display	LCD
Buttons	6