操作说明
Operator Instruction
4 0.5h 2h
倒退档
BCK-gear
低档
L-gear
倒档
R-gear
1
4h
2
4h
3
4h
4
3h
高档
H-gear
倒档
R-gear
1 0.5h
2 0.5h
3 0.5h
4 0.5h
总时间 Total hours(h)
7h 19h 16h 18h
4.18 拖拉机常见故障和排除方法
Common fault and troubleshooting for tractor
4.18.1 底盘故障和排除方法
Chassis fault and troubleshooting
4.18.1.1 离合器故障和排除方法
Clutch fault and troubleshooting
表 4-8 离合器故障和排除方法
Table 4-8 Clutch fault and troubleshooting
故障现象
Fault
故障原因
Fault reasons
排除方法
Troubleshooting
1. 离合器打滑
Clutch slipping
(1) 摩擦片及压盘有油污
Oil stain on friction lining and
pressure plate;
(2) 摩擦片磨损过多或烧毁
Friction lining over wear or burnt:
(3) 蝶形弹簧压力降低
Belleville spring reduction
(4) 踏板自由行程太小，或无自由行
程
Free pedal travel too small, or no free
travel
(5) 离合器从动盘变形严重
Clutch plate severely deformed
(1) 用汽油清洗，查找原因并排除故障
Use gasoline to wash and locate the cause
and do troubleshooting
(2) 更换摩擦片
Replace friction lining
(3) 更换蝶形弹簧
Replace belleville spring
(4) 按要求重新调整踏板自由行程
Readjust free travel of pedal according to the
requirements
(5) 更换离合器从动盘
Replace clutch plate
To Next Page
Loading...
Need help?
General
