4 Unpacking Instructions November 2009
3 Lift the chassis out of the packaging.
4 Carefully remove any foam pads and protective plastic
from the switch chassis as in the example diagram.
5 Once all OmniSwitch 6855 Series switches have been
removed from their packaging, continue to “Installation
Options.”
Installation Options
Depending on the model, there are three basic ways in which
the OmniSwitch 6855 Series switches can be installed:
• Rack-mount installation
• Tabletop installation
• Wall-Mount Installation
Note: For detailed, step-by-step instructions on install-
ing and mounting OmniSwitch 6855 hardware and
power supplies along with environmental and safety
considerations, please refer to the OmniSwitch 6855
Hardware Users Guide.
To Next Page
Loading...
Need help?
General
