3. Switch off the heater
1 Press the button with the arrow
until “On” (main breaker) in the
display ashes.
2 Press the -/Off button. “Off” (main
breaker) in the display ashes.
3 The settings are ready. “Off”
(main breaker) is shown in the
display when the panel returns to
standby.
ashes
ashes
4. Set the temperature you want in the vehicle
1 Press the button with the arrow
until the symbol for selecting
temperature ashes.
The temperature shown is the
temperature which is set at
present (in this case 22.0°C).
2 Increase the temperature by
pressing the +/On button. Lower
the temperature by pressing the
-/Off button. The diagram shows
that we have set the temperature
at 25.0°C.
3 The settings are complete and
the boiler is working at the set
temperature.
The temperature of the vehicle can be set from +5°C to
+30°C at intervals of 0.5°C.
ashes
ashes
5. Warm water
1 Press the button with the arrow
until the symbol for selecting
warm water ashes. The
“OFF” text is shown next to the
temperature on the display.
2 Switch the warm water on by
pressing the +/ON button.
The “ON” text is shown next to
the temperature on the display.
3 The warm water symbol is
displayed when the panel returns
to standby.
If you need more warm water you can increase the
quantity temporarily for 30 minutes by increasing the
water temperature from 50°C to 65°C.
When 30 minutes have elapsed, the water temperature
returns to 50°C and the symbol goes out. When you have
selected more warm water, the circulation pump stops.
1 Press the button with the arrow
until the warm water symbol
ashes. The “ON” text is shown
next to the temperature on the
display.
2 Switch off the warm water by
pressing the -/Off button.
The “OFF” text is shown next to
the temperature on the display.
3 The warm water symbol goes
out when the panel returns to
standby.
If you want you can switch off more warm water before
30 minutes have elapsed.
ashes
ashes
ashes
ashes
To Next Page
Loading...
Need help?
General
