Alfano 7 User Manual

Start the vehicle by engaging first gear (do
not start in second gear)
The device will begin to learn first gear once
the RPM and speed are detected
While learning the gear, the gear that the
device is configuring is indicated in the center
of the screen
For correct configuration, constant and non-
abrupt guidance is required
Do not change the indicated gear until the
device requests it
Once the device has successfully learned the
specified gear, it will prompt to proceed to
the next one
Enter the requested gear and continue
learning until the last gear is reached (value
entered in the previous screen under the
"number of gears" item)
After completing the learning of the last gear, the Alfano 7 will start recording the session
There is no need to return to the pits. You may complete the session as usual
32
8. Settings
8.2.2.1 Engaged Gear Configuration
8.2. Alfano 7 Settings, Connected Sensors and Boxes
8.2.2. TRANSMISSION

Alfano 7 Specifications

General

Brand	Alfano
Model	7
Category	Measuring Instruments
Language	English