CQ-20B Rack Kit Fitting Note 2 AP12817 iss.1
Copyright © 2021 Allen & Heath Ltd, Kernick Industrial Estate, Penryn, TR10 9LU, UK. All rights reserved.
Mounting in a rack
• Ensure that there is adequate ventilation around all vents and on the right
hand side where the cooling fan is located.
• A minimum of 4U of rack space is required.
• Use the p-clip on the rear of the CQ to secure the mains IEC connection
before mounting.
For further assistance please contact support - https://support.allen-heath.com
Read the Safety Instructions Sheet included with the product and the information printed on the panel before operating.
A limited one-year manufacturer’s warranty applies to this product, the conditions of which can be found at:
www.allen-heath.com/legal
By using this Allen & Heath product and the software within it you agree to be bound by the terms of the relevant End User
Licence Agreement (EULA), a copy of which can be found at: www.allen-heath.com/legal
Register your product with Allen & Heath online at: http://www.allen-heath.com/support/register-product/
Check the Allen & Heath website for the latest documentation and software updates.
www.allen-heath.com
To Previous Page
Loading...
Need help?
General