Do you have a question about the ALLEN & HEATH XB-14 and is the answer not in the manual?
Mono channel Mic input range | +6 to –63dBu |
---|---|
Mono channel Line input range | +10 to –26dBu |
Insert point nominal level | 0dBu |
Stereo input nominal level | 0dBu |
Telco channel input range | +10 to –26dBu |
External monitor inputs nominal level | 0dBu |
PGM L & R outputs nominal level | +4dBu |
---|---|
PGM Mono output nominal level | 0dBu |
PGM L & R inserts nominal level | -2dBu |
Aux output nominal level | 0dBu |
Mix B outputs nominal level | 0dBu |
Rec outputs nominal level | 0dBu |
THD+n Mic in to PGM L/R Out | 0.003% |
---|---|
THD+n Mic in to PGM Out | 0.007% |
THD+n Line in to PGM L/R out | 0.004% |
THD+n Stereo in to PGM out | 0.003% |
Noise Mic Pre EIN | -127dBu |
Noise PGM out | -92dBu |
Mic in to PGM L/R Out | 20Hz to 20kHz |
---|---|
Line in to PGM L/R out | 10Hz to 30kHz |
Stereo in to PGM L/R out | 10Hz to 30kHz |
Analogue Headroom Outputs | 21dB |
---|---|
USB in & out headroom | 14dB |
Analogue Headroom Mix point | 24dB |
Mono fader attenuation 1kHz/10kHz | -99/-90 |
---|---|
Mono ON switch attenuation 1kHz/10kHz | -96/-80 |
TELCO fader attenuation 1kHz/10kHz | -99/-92 |
TELCO ON switch attenuation 1kHz/10kHz | -102/-100 |
Stereo fader attenuation 1kHz/10kHz | -100/-91 |
Stereo ON switch attenuation 1kHz/10kHz | -102/-102 |