Allen-Bradley 1732E ArmorBlock Series User Manual

20 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect
Publication 1732E-IN010C-EN-E - June 2013
Current per module, max 2.0 A – 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR
8.0 A – all other modules
Leakage current, off-state output,
max
0.5 mA – 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR
50 μA – all other modules
Surge current per output, min 1.2 A for 10 ms, repeatable every 2 s
General Specifications
Attribute Value
Voltage, auxiliary power, max 30V DC
Voltage, auxiliary power, min 12V DC
Current, Ethernet system power,
max (pins 2, 3 sensor
source/module power)
1 A
Current, auxiliary power, max per
output module (pins 2, 3 sensor
source/module power plus pins
1, 4 for output loads)
2 A – 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR
8 A – all other modules
Current, auxiliary power
connector, max per module
10 A
Current, sensor source, per input,
max
50 mA
Current, sensor source, per
connector, max
100 mA
Communication rate EtherNet/IP
10/100 Mbps
Full or half-duplex
100 meter per segment
Isolation voltage 50V (continuous), Basic Insulation Type, I/O to Ethernet,
Power to Ethernet
Type tested at 707V DC for 60 s
LED indicators Module Status - red/green
Network Status - red/green
Link Status - green/yellow
Auxiliary Power - green
I/O LED - yellow
I/O LED - yellow/red – 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR
Dimensions (HxWxD), approx. 200 x 60.4 x 45 mm (7.87 x 2.38 x 1.77 in.)
Weight, approx. 0.51 kg (1.12 lb) – 1732E-16CFGM12QCWR, 1732E-16CFGM12P5QCWR
0.43kg (0.95 lb) – all other modules
1732E ArmorBlock 2-Port EtherNet Module Output
Attribute Value

Allen-Bradley 1732E ArmorBlock Series Specifications

General

Brand	Allen-Bradley
Model	1732E ArmorBlock Series
Category	Control Unit
Language	English