Allen-Bradley 1734-AENT User Manual

Installation Instructions
1734 POINT I/O EtherNet/IP Adapter
Catalog number 1734-AENT, Series B
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
Additional Resources 4
North American Hazardous Location Approval 5
European Hazardous Location Approval 6
About The Adapter 7
Before You Begin 8
Firmware Backward Compatibility 8
Understand Messaging 8
Configure Autobaud 8
Install the Adapter 9
Set the Network Address 11
Replace The Adapter 13
Wire The Adapter 15
Interpret Status Indicators 17
Specifications 19

Allen-Bradley 1734-AENT Specifications

General

Product Type	EtherNet/IP Adapter
Network Protocol	EtherNet/IP
Enclosure Type Rating	None (open-style)
Storage Temperature	-40 to 85 °C (-40 to 185 °F)
Housing Material	Plastic
Operating Temperature	0 to 55 °C (32 to 131 °F)
Current Draw @ 24V DC	100 mA maximum
Network Address	Configurable via software
Ports	1 Ethernet port