Installation Instructions
Original Instructions
Stratix 5800 Ethernet Managed Switches
Catalog Numbers 1783-MMS10 Series A, 1783-MMS10E Series A, 1783-MMS10B Series A, 1783-MMS10BE Series A,
1783-MMS10R Series A, 1783-MMS10ER Series A, 1783-MMS10 Series B, 1783-MMS10E Series B, 1783-MMS10B Series B,
1783-MMS10BE Series B, 1783-MMS10R Series B, 1783-MMS10ER Series B, 1783-MMS10EA Series B, 1783-MMS10EAR Series B,
1783-MMX8T Series A, 1783-MMX8E Series A, 1783-MMX8EA Series A, 1783-MMX8S Series A, 1783-MMX8SA Series A,
1783-MMX6T2S Series A, 1783-MMX16T Series A, 1783-MMX16E Series A, 1783-MMX14T2S Series A
Topic Page
Parts List 5
Required Tools 6
Site Requirements 6
Connect an Expansion Module 7
Mount the Switch on a DIN Rail 8
Ground the Switch and Expansion Module 8
Wire the DC Power Source 9
Install the Power Connectors on the Switch 10
Wire External Alarms 11
Install the Alarm Relay Connector on the Switch 12
Install or Remove and SFP Module 12
Install or Remove the SD Card 13
Connect to 10/100/1000 Ports 14
Connect to SFP Modules 14
Confirm Installation 14
Remove the Switch from the DIN Rail 14
Specifications 15
Additional Resources 16
To Next Page
Need help?
General
