66 Rockwell Automation Publication 8720MC-RM001K-EN-P - September 2018
Chapter 5 Connect the 8720MC-RPS Unit
EMC Directive
This unit is tested to meet Council Directive 2004/108/EC Electromagnetic
Compatibility (EMC) by using these standards, in whole or in part:
EN 61800-3 - Adjustable Speed Electrical Power Drive Systems,
Part 3 - EMC Product Standard including specific test methods
The product described in this manual is intended for use in an industrial
environment.
CE Declarations of Conformity are available online at
http://www.rockwellautomation.com/rockwellautomation/certification/
overview.page.
Low Voltage Directive
These units are tested to meet Council Directive 2006/95/EC Low Voltage
Directive. The EN 60204-1 Safety of Machinery-Electrical Equipment of
Machines, Part 1-Specification for General Requirements standard applies in
whole or in part. Additionally, the standard EN 61800-5-1 Electronic
Equipment for use in Power Installations apply in whole or in part.
To Next Page
Loading...
Need help?
General
