Publication 1756-IN058D-EN-P - October 2000
Installation Instructions
ControlLogix
DC (19.2-30V) Diagnostic Output Module
(Catalog Number 1756-OB16D)
Obtain a User Manual
This product also has a user manual (pub. no. 1756-6.5.8). To view it,
visit www.ab.com/manuals
or www.theautomationbookstore.com
You can also purchase a printed manual by:
• contacting your local distributor or Rockwell Automation
representative
• visiting www.theautomationbookstore.com and placing
an order
To: See page:
Obtain a User Manual 1
Identify the Module Components 2
Prevent Electrostatic Discharge 3
See Removal and Insertion Under Power (RIUP) 3
Understand Compliance to European Union Directive 4
Note the Power Requirements 5
Install the Module 5
Key the Removable Terminal Block/Interface Module 6
Wire the Module 7
Assemble the Removable Terminal Block and the Housing 8
Install the Removable Terminal Block onto the Module 8
Check the Indicators 10
Remove the Removable Terminal Block from the Module 11
Remove the Module 12
See 1756-OB16D Specifications 12
Hazardous Location information 14
Allen-Bradley Drives
To Next Page
Need help?
General
