Quick Start Guide:
Seng up your Amazon Fire TV Sck 4K
Check for the following items in your Amazon Fire TV
Sck Packet.
Need help?
Contact Support: _______________________
Plugging Fire TV Sck into TV
Take your Fire TV Sck and plug the USB power cord
into the micro-USB port. Plug the other end of the
power cord into the Power Adapter.
Connect the Power Adapter to a power outlet.
(Note: It is recommended to use the Power Adapter
instead of the powered USB Ports.)
Plug the Fire TV Sck into any HDMI port on your TV.
For easier access to the Sck, you can use the HDMI
Extender (shown above) by plugging the Fire TV Sck
into the HDMI EXtender then plugging the HDMI
Extender into the HDMI port on your TV.
Using your TV remote, turn your TV to the same
HDMI channel that the Fire TV Sck is plugged into
(i.e. HDMI1, HDMI3, etc.). You should then see a
loading screen with a Fire TV Sck logo.
1
2
3
Using the Direconal Ring, highlight the desired
language and press the OK buon to set the
language. (The OK buon is the large circular buon
on the remote inside the Direconal Ring.)
5
Back
Home
Rewind
Play/Pause
Guide
Fast Forward
Volume Up/Down
Mute
Direconal Ring
OK
Voice Search/Assistant
HDMI Extender
Power Adapter
Fire TV Sck
Remote
Power Cord
Seng Up Fire TV Sck Remote
Put the baeries into your Fire TV Remote.
It should automacally pair with your Fire TV Sck. If
your remote doesn’t pair, press and hold the Home
Buon for up to 10 seconds to send it to “discovery
mode” so you can complete the pairing process.
Once the remote is paired with the Fire TV Sck,
press the Play/Pause buon to start the set up.
4