Quick Start Guide
UDM-RX02N
Endeleo Multi-Format Receiver
Overview
Installed at the display device, the UDM-RX02N (FG1402-20) converts the signal
received from UDM-0808-SIG Multi-Format Distribution Hubs to standard audio/video
signals. In addition, the UDM-RX02N supports AMX IR(.irl) files to provide native AMX
device control. Serial control of the display device is also possible via standard
asynchronous serial support.
The UDM-RX02N is powered locally to support long cable runs and is capable of being
powered remotely when short cable runs are used. With intelligent receiver
technology, each UDM-RX02N is powered remotely from the Multi-Format Distribution
Hub via Cat5/5e/6/7 Ethernet cable.
Distances of 1,000 feet/300 meters are supported at 1280x1024; higher resolutions
are supported at shorter distances.
Common Application
Perfect for the receiving end of a variety of sources such as HDTV Satellite tuners,
Blu-Ray DVD players and PCs just to name a few to be displayed in rooms throughout
a residence or in classrooms, conference rooms presentation rooms or other
commercial applications.
Features
• Video Support for 1600 x 1200 (UXGA), 1920 x 1080 (HDTV), Component Y/Pb/
Pr, S-Video, CVBS-PAL/NTSC
• S/PDIF, Digital and analog stereo audio support
• IR blaster and receiver ports
Note: Unlike previous versions of the UDM receiver, the UDM-RX02N is a native
NetLinx device, and can be configured using the NetLinx Studio software application.
Compatibility
The UDM-RX02N is compatible for use with UDM-0808-SIG Multi-Format Distribution
(FG1402-01) Hubs.
Product Specifications
Configuration Options
The UDM-RX02N is configured via the UDM Hub that it is connected to, via Netlinx
Studio or via serial commands. Refer to the UDM-0808-SIG, UDM-RX02N &
UDM-AB8-SIG Operation/Reference Guide for configuration details.
The UDM-RX02N will appear in NetLinx Studio’s Online Device Tree as being
connected to the UDM-0808-SIG Hub.
• By default, the UDM-0808-SIG is assigned device # 05600.
• By default, the UDM-RX02N is assigned device # 0560X, where X is the port
number used by each UDM-RX02N.
Audio & Video Formats/Resolutions/Distance
Note: The maximum distances indicated above are not absolute, but are
recommended distances that have been tested to deliver video at the specified
resolutions, without significant signal degradation. In particular, lower resolutions
(640 x 480, 720 x 480 and 800 x 600) can often be delivered significantly further than
what is indicated in the table. Refer to the UDM-0808-SIG Endeleo Multi-format
Distribution Hub Operation/Reference Guide for additional details on maximum cable
distances.
Wiring and Connections
The UDM-RX02N connects to an Endeleo UDM Hub using a twisted pair Cat5/5e/6/7
Ethernet cable.
Power Connector
Use the 2.1mm barrel-style DC power socket (female) to connect to a 24VDC, 750mA
power supply.
Note: While the UDM-RX02N can be powered via UTP for short cable runs, a local
(24VDC, 750mA) power supply is required for cable distances above 328’ / 100M. The
recommended power supply is the UDM-PS (FG-UDM-PS, included).
FIG. 1
UDM-RX02N
UDM-RX02N Specifications
Power Requirements: • 24VDC @ .75A
• Power via UDM-0808-SIG (UTP pins 7 & 8) supported for
cable runs of less than 328' / 100M.
• Local 24VDC, 750mA Power Supply required for cable
distances above 328’ / 100M (FG-UDM-PS, included)
Rear Panel Connectors:
Power Socket: 2.1mm barrel-style DC power socket (female)
UDM Hub (RJ45) Port: Provides audio/video transport as well as control via Cat5,
Cat5e or Cat6 to an UDM Hub.
Serial (RJ12) port: Provides bi-directional serial control of remote devices.
Also allows administrators to control the various functions to the
UDM-RX02N from a command line prompt and terminal
connection.
IR Rx (3.5mm) Port: 3.5mm input port, for connection of an IR receiver to allow setup
of the UDM-RX02N, local compensation controls, and remote
control of centrally located IR devices.
IR Tx (3.5mm) Port: 3.5mm IR Transmitter output port allows one IR-controlled
device (such as a DVD or VCR player) to be controlled via
optional wired IR emitter.
Audio Connectors: • Black RCA female connector - Digital audio
• White RCA female connector - Analog audio Left
• Red RCA female connector - Analog audio Right
(front)
Serial port (RJ12)
IR Rx port
SPDIF Digital Audio port
RCA audio
(left/right)
CVBS port
S-Video port
Power connector
UDM HUB port (RJ45) - from an
IR Tx port
VGA (HD15) port
Component (Y) port
Component (Pb) port
Component (Pr) port
“OUTPUT” port on the UDM Hub
(rear)
UDM-RX02N Specifications (Cont.)
Video Connectors: • Yellow RCA female connector - CVBS (supports composite
video)
• S-Video - S-video female connector
• VGA - HD15 female connector (supports VGA video)
• Green RCA female connector - Component output: Y
• Blue RCA female connector - Component output: Pb
• Red RCA female connector - Component output: Pr
Operating Environment: • 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)
Dimensions (HWD):
1" x 8 15/16” x 3 3/8” (25 mm x 227 mm x 85 mm)
Weight:
1.45 lb. (658 g)
Certifications: • CE
• FCC part 15 Class A
Included Accessories: UDM-PS 24VDC, 750mA Power Supply (FG-UDM-PS)
Note: No A/V interface cables supplied.
Other AMX Equipment: • RS232 DB9/RJ12 Connection Cable (FG-RS01)
• UDM-RC05 Multi-Format IR Remote Control
(FG-UDM-RC05)
• IR01 IR Emitter Module (FG-IR01)
• IR03 External IR Receiver Module (FG-IR03)
Audio & Video Formats/Resolutions/Distance
Class Format Name UDM-RX02N
Composite/S-Video 720 x 480 NTSC 300 m / 1000’
720 x 576 PAL 300 m / 1000’
Component 720 x 480 480p 300 m / 1000’
720 x 576 576p 300 m / 1000’
1280 x 720 720p 300 m / 1000’
1920 x 1080 1080i 300 m / 1000’
1920 x 1080 1080p 300 m / 1000’
RGBHV 640 x 480 VGA 300 m / 1000’ *
800 x 600 SVGA 300 m / 1000’ *
1024 x 768 XGA 300 m / 1000’ *
1280 x 1024 SXGA 300 m / 1000’ *
1600 x 1200 UXGA 140 m / 460’
1920 x 1080 HD 140 m / 460’
* When using VGA modes with audio enabled, the
maximum cable distance is approximately 200 m / 650’
(UDM-RX02N).
To Next Page
Need help?
General
