&Tradition Bellevue AJ9 Arne Jacobsen 1929 User Manual

A
For indoor use only
E14 maximum 25W
Bulb not included
B
C
03/21
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Content
A Wall lamp fitted with 2 meter cord
B 2 x screws (for mounting the lamp to the wall bracket)
C Wall bracket
Tools needed
- Bulb type E14
- Screwdriver
- Screws and plugs appropriate for wall
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The lamp is only intended for interior use.
- Lamp shade gets hot after prolonged use.
- If the external cable or cord of this lamp is damaged,
it must be replaced by the manufacture or a similar
qualified person in order to avoid a hazard.
Cleaning instructions
- The Bellevue lamp is made from solid brass and lacquered
aluminum. The brass used is uncoated and will therefore
develop a unique and beautiful patina over time.
- Wipe surface of lamp shade with a soft, damp spong or
cloth, and wipe immediately after with a dry cloth.
- Do not use any abrasive cleaning tools such as steel
wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit,
terpentine household glass cleaner or cellulose thinners.
- Only wipe the inside of the shade with a soft, damp cloth
or feather duster.
Step 1
Ensure the power cord can be connected so it is not over-
stretched or an obstacle. Place the wall bracket (C) on top
of a spirit level in the desired location for the lamp. Ensure
the mount is level and mark the placement of the holes
with a pencil.
Step 2
Drill the holes for the bracket and use the correct type
of screw and plug for the type of wall which the lamp is to
be fitted to. Tighten the screws and ensure the bracket is
safely fixed in place.
Step 3
Place the lamp (A) over the wall bracket. Align the screw
holes of the lamp with the bracket and tighten the screws
(B) with a Hex/Allen key.
Bellevue AJ9
Arne Jacobsen
1929

&Tradition Bellevue AJ9 Arne Jacobsen 1929 Specifications

General

Brand	&Tradition
Model	Bellevue AJ9 Arne Jacobsen 1929
Category	Home Lighting
Language	English