A
B
Flowerpot VP9
Verner Panton
1968
01/21
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Contents
A Flowerpot lamp
B USB charging cable
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children’s reach.
- This lamp is for indoors use only. It can be taken outdoors,
but must be kept and stored indoors.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the cable within reach of small children or
anywhere with a risk of falling over it.
- Batteries must be disposed of according to local
environmental laws for waste disposal.
Cleaning instructions
- Wipe the surface with a soft, damp sponge or cloth,
and wipe immediately with a dry cloth.
- Do not use any abrasive cleaning tools such as steel
wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit,
turpentine, household glass cleaner or cellulose thinner.
Important
&Tradition will not take any responsibility for accidents or
injuries that occurs due to use of incorrect battery/LED
light bulb.
The battery must be removed from the lamp before it is
scrapped; the appliance must be disconnected from the
supply mains when removing the battery; the battery must
be disposed safely.
For LED bulb and battery information or inquiry,
please do not hesitate to contact &Tradition via mail on
info@andtradition.com.
Step 1
The lamp is delivered fully assembled.
Step 2
Before use, the battery in the lamp must be fully charged.
Plug the micro USB cable into the USB port on the bottom
of the lamp. Connect the USB cable to a power supply.
&Tradition replacement battery can be purchased
upon request.
Step 3
When charging, a red LED light will appear next to the
USB port. When the lamp is fully charged the red light
will turn green.
For indoor
Input 5.0V
2A micro USB cable
Max 3 Watt dimmable LED board (replaceable)
Charging time: 8 hours
Operating time in highest light setting: 10 hours
To Next Page
Loading...
Need help?
General