Need help?Do you have a question about the Apec Water ROES-50 and is the answer not in the manual?
General| Product Type | Reverse Osmosis System |
|---|---|
| System Type | Under Sink |
| Stages | 5 |
| Membrane Type | Thin Film Composite (TFC) |
| Daily Production | up to 50 gallons |
| Tank Capacity | 3.2 Gallons |
| Storage Tank Capacity | 3.2 Gallons |
| Operating Pressure | 40-85 psi |
| Operating Temperature | 40-100 °F |
| Filter Life | 6-12 months |
| Production Rate | 50 GPD |
| Warranty | 1 year |
Check all components for damage during shipping. Contact supplier if any part is broken.
List of tools required for installation, including drill, wrenches, screwdriver, and utility knife.
Specifies operating conditions like pressure, temperature, and TDS level for optimal performance.
Guidelines for safe and compliant installation of the RO system.
Details the various parts and fittings provided in the installation kit for the RO system.
Connects the RO system to the cold water supply.
Installs the drain saddle onto the sink's drain pipe.
Guides on drilling holes and mounting the RO faucet.
Places the main RO unit and storage tank.
Connects tubing to RO system fittings and components.
Instructions for diverting purified water solely to an ice maker.
Advice on adding shut-off valves for multiple output points.
Recommended replacement interval for sediment and carbon pre-filters.
Recommended replacement interval for the RO membrane.
Recommended replacement interval for the final inline carbon filter.
Recommendation for replacing O-rings during filter changes.
Defines key terms and acronyms used in RO system operation and maintenance.
Illustrates the water flow path through the five stages of the RO system.
Labeled diagram of the RO system head, identifying key ports and components.
Detailed identification and function of each numbered point on the ROES system head.
Instructions for installing an optional AirGap faucet for water disposal.
Defines the scope and duration of the limited product warranty for the RO system.
Outlines the process and conditions for product repair or replacement under warranty.
Specifies the requirements that must be met for the limited product warranty to be valid.
To Next Page