Aruba 220 Series Access Points
Installation Guide
XXX-IG-0X | Month Year 1
The Aruba AP-224 and AP-225 wireless access points support the IEEE 802.11ac standard for high-performance
WLAN. This access point uses MIMO (Multiple-in, Multiple-out) technology and other high-throughput mode
techniques to deliver high-performance, 802.11n 2.4 GHz and 802.11ac 5 GHz functionality while simultaneously
supporting existing legacy wireless services. The AP-220 Series access point works only in conjunction with an
Aruba Controller.
The Aruba AP-220 Series access point provides the following capabilities:
Wireless transceiver
Protocol-independent networking functionality
IEEE 802.11a/b/g/n/ac operation as a wireless access point
IEEE 802.11a/b/g/n/ac operation as a wireless air monitor
Compatibility with IEEE 802.3at PoE+ and 802.3af PoE
Central management configuration and upgrades with an Aruba Controller
Package Contents
The following materials are included with this product:
AP-224 or AP-225 access point
9/16" and 15/16” Ceiling Rail Adapters
Hardware Overview
The following sections outline the hardware components of the 220 Series access point.
LED
Figure 1 Aruba AP-220 Series LEDs
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.
To Next Page
Need help?
General
