ASROCK Fatal1ty 970 Performance/3.1 Series User Manual

19
English
Fatal1ty 970 Performance/3.1 Series
Power LED Header
(3-pin PLED1)
(see p.6, No. 21)
Please connect the chassis
power LED to this header
to indicate the system’s
power status.
Serial ATA3 Connectors
(SATA3_0:
see p.6, No. 10)
(SATA3_1:
see p.6, No. 15)
(SATA3_2:
see p.6, No. 11)
(SATA3_3:
see p.6, No. 14)
(SATA3_4:
see p.6, No. 12)
(SATA3_5:
see p.6, No. 13)
ese six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
USB 2.0 Headers
(9-pin USB_4_5)
(see p.6, No. 25)
(9-pin USB_6_7)
(see p.6, No. 23)
(9-pin USB_8_9)
(see p.6, No. 24)
Besides four USB 2.0 ports
on the I/O panel, there
are three headers on this
motherboard. Each USB
2.0 header can support
two ports.
USB 3.0 Headers
(19-pin USB3_5_6)
(see p.6, No. 9)
Besides four USB 3.0 ports
on the I/O panel, there is
one header and one port
on this motherboard.
Each USB 3.0 header can
support two ports.
1
PLED+
PLED+
PLED-
DUMMY
GND
GND
P+
P-
USB_PWR
P+
P-
USB_PWR
1
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
SATA3_4SATA3_0 SATA3_2
SATA3_1 SATA3_3
SATA3_5

ASROCK Fatal1ty 970 Performance/3.1 Series Specifications

General

Brand	ASROCK
Model	Fatal1ty 970 Performance/3.1 Series
Category	Motherboard
Language	English