5-44 Chapter 5: Software support
To install the RAID driver in Windows XP:
1. During the OS installation, the system prompts you to press the <F6> key to
install third-party SCSI or RAID driver.
2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk
drive.
3. When prompted to select the SCSI adapter to install, make sure you select
Intel(R) SATA RAID Controller (Desktop ICH9R).
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
®
Vista:
1. Insert the oppy disk/USB device with RAID driver into the oppy disk drive/USB
port.
2. During the OS installation, select
Intel ICH9R.
3. Follow the succeeding screen instructions to complete the installation.
To Next Page
Loading...
Need help?
General
