ASUS P8Z77-V LK 2-17
Chapter 2
2. GPU Boost switch
Turning this switch to Enable will automatically optimize the system for fast, yet stable
clock speeds.
• For ensuring the system performance, turn the switch setting to
Enable
when the
system is powered off.
• The GPU LED near the GPU switch lights when the switch setting is turned to Enable.
Refer to section 2.2.7 Onboard LEDs for the exact location of the GPU LED.
• If you change the switch setting to
Enable under the OS environment, the GPU function
will be activated after the next system bootup.
3. EPU switch
Turning this switch to Enable will automatically detect the current PC loadings and
intelligently moderate the power consumption.
• The EPU LED near the EPU switch lights when the switch setting is turned to Enable.
Refer to section 2.2.7 Onboard LEDs for the exact location of the EPU LED.
• If you change the switch setting to
Enable under the OS environment, the EPU
function will be activated after the next system bootup.
• You may change the EPU settings in the software application or BIOS setup program,
and enable the EPU function at the same time. However, the system will use the last
setting you have made.
For ensuring the system performance, turn the switch setting to Enable when the system
is powered off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
