EasyManuals Logo

Asus RT-N12 Series User Manual

Asus RT-N12 Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
What you need
To set up your network, you need one or two computers that meet
the following system requirements:
Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX)
IEEE 802.11b/g/n wireless capability
An installed TCP/IP service
Web browser such as Microsoft Internet Explorer, Mozilla
Firefox, Apple Safari, or Google Chrome
NOTE:
If your computer does not have built-in wireless capabilities,
install an IEEE 802.11b/g/n WLAN adapter to your computer
to connect to the network.
The Ethernet RJ-45 cables used to connect the network
devices should not exceed 100 meters.
Setting up your wireless router
IMPORTANT!
Use a wired connection when setting up your wireless router
to avoid possible wireless setup issues.
Before setting up your ASUS wireless router, do the following:
If you are replacing an existing router, disconnect it from
your network.
Disconnect the cables/wires from your existing modem. If
your modem has a backup battery, remove it as well.
Reboot your computer (recommended).

Other manuals for Asus RT-N12 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus RT-N12 Series and is the answer not in the manual?

Asus RT-N12 Series Specifications

General IconGeneral
Wireless StandardIEEE 802.11b/g/n
Frequency Band2.4 GHz
Data RateUp to 300 Mbps
LAN Ports4 x 10/100 Mbps
WAN Ports1 x 10/100 Mbps
Operating Temperature0 °C to 40 °C
Antenna2 x external antennas
Encryption64/128-bit WEP, WPA2-PSK, WPA-PSK
SecurityFirewall
FirewallSPI
Storage Temperature-20°C to 70°C
Storage Humidity20% to 90% RH

Related product manuals