3-2
2. Color
You can adjust Brightness,
Contrast, Saturation, Color
Temp., and Skin Tone from this
menu.
Brightness• : the adjusting
range is from 0 to 100.
is a hotkey to activate this
function.
Contrast• : the adjusting range is from 0 to 100.
is a hotkey to
activate this function.
Saturation• : the adjusting range is from 0 to 100.
Color Temp.• : contains four modes including Cool, Normal, Warm, and
User Mode.
Skin Tone• : contains three color modes including Reddish, Natural, and
Yellowish.
Smart View• : provides better display quality under big viewing angle.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3. Image
You can adjust Sharpness, Trace
Free, Aspect Control, ASCR,
Position (VGA only), and Focus
(VGA only) from this menu.
Sharpness• : the adjusting
range is from 0 to 100.
Trace Free• : adjusts the
response time of the monitor.
Aspect Control• : adjusts the aspect ratio to “Full”, “4:3”, or “OverScan”
(only available for the HDMI input).
ASCR• : turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
Position• : adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
Focus• : reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one •
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
