EasyManuals Logo
Home>Atag>Oven>CX4592D

Atag CX4592D User Manual

Atag CX4592D
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
EN 13
Setting the time
: 00
11
12
13
TIME l HOUR
1. Turn the selection knob and select the hours.
2. Confirm this setting by pressing the right navigation key or by
pressing the selection knob.
3. Turn the selection knob and select the minutes.
4. Confirm this setting by pressing the confirm key.
All the start-up settings are set and the appliance will show the
standby display.
The language, time and date can be adjusted in the settings menu (see
‘Settings menu’ chapter). The settings menu can be opened from the
start display via the ‘Plus’ menu.
Standby display
The standby display will show the time, date, cavity temperature (if
this is higher than 80 °C) and the timer (if set). The appliance goes to
standby mode after:
Turning the function knob to 0 (‘off’ position).
Pressing the stop key multiple times (deeper in the menu).
12 : 00
03 05 2015
Off mode
Default the appliance will shut down after no action for a set time of
30 minutes.
Press and hold the stop key to shut down the appliance manually.
Switching the appliance on
Press and hold the stop key to switch on the appliance.
The appliance can also be switched on by turning the function knob
to a function.
INITIAL USE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag CX4592D and is the answer not in the manual?

Atag CX4592D Specifications

General IconGeneral
BrandAtag
ModelCX4592D
CategoryOven
LanguageEnglish

Related product manuals