Atari 2600 4 switch Video Mod
Installation Guide
The installation kit contains the following items:
1. Atari 2600 4 switch Mod board
2. Black 3.5mm panel mount jack with attached wires & pins.
3. Black Svideo mini-din panel mount jack with attached wires & pins.
4. Yellow RCA jack with 1 attached wire & pin.
**NOTE** you will need to provide all external cables.
1. AUDIO 3.5mm male plug on one end and two RCA plugs on the other.
2. SVIDEO male-male Svideo cable to connect to your monitor or TV.
3. COMPOSITE If you also want to connect Composite Video you need a
male-male RCA extension cable.
To Next Page
Need help?
General
