Electronics
1. Read instructions – all the safety and operating instructions should
be read before the appliance is operated.
2. Retain these instructions – the safety and operating instructions
should be retained for future reference.
3. Heed warnings – all warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow instructions – all operating and other instructions should be
followed.
5. Water and moisture – the appliance should not be used near water,
for example near a bathtub, washbowl, kitchen sink, laundry tub, in
a wet basement or near a swimming pool etc..
6. Ventilation – the appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug or similar
surface that may block the ventilation openings. Similarly, the
appliance should not be built into an installation, such as a bookcase
or cabinet, that may impede the flow of air through the ventilation
openings.
7. Heat – the appliance should be situated away from heat sources such
as radiators, stoves or other appliances that produce heat.
8. Power sources – the appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
9. Power cord protection – power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs,
convenience receptacles and the point where they exit the
appliance.
10. Cleaning – the appliance should be cleaned only as recommended
by the manufacturer.
11. Unattended periods – the power cord of the appliance should be
unplugged from the outlet when left unused for a long period of
time.
12. Object and liquid entry – care should be taken so that objects and
liquids do not fall into the appliance.
13. Damage requiring service – the appliance should be serviced by
qualified service personnel when:
i. the power supply cord or the plug has been damaged
ii. objects have fallen or liquid has been spilled into the appliance
iii. the appliance has been exposed to rain or other serious liquid
exposure
iv. the appliance does not appear to operate normally or exhibits a
marked change in performance
v. the appliance has been dropped or the cabinet damaged
14. Servicing – the user should not attempt to service the appliance
beyond those measures described in the operating instructions. All
other servicing should be referred to qualified service personnel.
15. Grounding or polarisation – precautions should be taken so that
grounding or polarisation means for the appliance are not defeated.
Safety Warnings
Contents
Page 1 Introduction
Page 1 Generic Information
Section G1 Installation
Section G2 Mains Connection
Page 2 Section G3 Fuses
Section G4 ATC Remote Handset
Section G5 Care and Maintenance
Section G6 Warranty and Contact
Page 3 CA2 Preamplifier
Section 1.1 Description
Section 1.2 Inputs
Page 5 Section 1.3 Outputs
Section 1.4 Operation
Section 1.5 Specifications
Page 7 SCA2 Preamplifier
Section 2.1 Description
Section 2.2 Inputs
Page 9 Section 2.3 Outputs
Page 10 Section 2.4 Operation
Page 11 Section 2.5 Specifications
Page 12 P1 & P2 Power Amplifiers
Section 3.1 Description
Page 13 Section 3.2 Inputs
Section 3.3 Outputs
Section 3.4 Operation
Page 14 Section 3.5 Specification
Page 15 SIA2-150 Integrated Amplifier
Section 4.1 Description
Section 4.2 Inputs
Section 4.3 Outputs
Page 16 Section 4.4 Operation
Page 17 Section 3.5 Specification
To Next Page
Loading...
Need help?
General
