Step Action
3 Remove and discard the filter element.
4 Clean the bowl and replace its O-ring.
5 Fit the new filter element.
6 Refit the filter bowl.
7 Tighten oil filler plug (3).
8 Close condensate drain valve (4).
6.6 Storage after installation
If the compressor is stored without running from time to time, consult Atlas Copco as protective
measures may be necessary.
6.7 Service kits
Service kits
For overhauling and for preventive maintenance, a wide range of service kits is available. Service
kits comprise all parts required for servicing the component and offer the benefits of genuine
Atlas Copco parts while keeping the maintenance budget low.
Also a full range of extensively tested lubricants, suitable for your specific needs is available to
keep the compressor in excellent condition.
Consult the Spare Parts List for part numbers.
Instruction book
2920 7119 21 65
To Next Page
Loading...
Need help?
General
