SF 4 P - details
AF Inlet air filter AV Air outlet valve
Ca Air cooler E Compressor element
M Motor PS Pressure switch
SV Safety valve TSHH Temperature switch
CV Check valve
SF Full-Feature
The control panel comprises a pressure gauge, an hour meter, a start button and a temperature gauge
indicating the dew point (Gd). The compressor is controlled by a pressure switch.
The electric components are located in the cubicle behind the front panel door.
A check valve (CV) prevents loss of compressed air when the compressor is stopped.
A temperature switch and a safety valve (SV) protect the compressor element against overheating and too
high pressure respectively.
The compressed air is cooled by an air cooler (Ca) before it enters the dryer.
Single phase units are equipped with a vent valve for easy starting.
Instruction book
12 2920 7110 11
To Next Page
Loading...
Need help?
General
