• Work on the refrigerant circuit of the cooling dryer or on any equipment which influences its function
must be undertaken by an authorized control body.
• The installation should be checked once a year by an authorized control body.
General
The following remarks should be kept in mind:
• Keep the dryer clean.
• Brush or blow off the finned surface of condenser regularly.
• Inspect and clean the electronic condensate drain regularly.
a. Functioning of the drain can be checked by pushing the TEST button of the drain, consult
section Air dryer.
b. Cleaning of the drain filter can be done by opening the manual drain valve during a few
seconds.
Device settings
The regulating and safety devices are factory adjusted to obtain optimum performance of the dryer. Do not
alter the setting of any of the devices.
Connecting pressure measuring devices in the refrigerant circuit can change the amount
of refrigerant in the system. This results in a less optimal working of the dryer.
Instruction book
38 2920 7110 11
To Next Page
Loading...
Need help?
General
