AudioCodes MediaPack 1288 User Manual

1 | Page
MediaPack™ 1288 Analog Gateway
Quick Setup Guide
Welcome
Congratulations on purchasing your AudioCodes MediaPack 1288 (MP-1288) High-Density Analog Gateway,
hereafter referred to as device!
This document is only intended to provide basic setup instructions for initial access to the device and
connecting it to your network. For advanced configuration and cabling, refer to the device's User's Manual and
Hardware Manual respectively, which can be downloaded from AudioCodes website at
https://www.audiocodes.com/library/technical-documents.
Before you begin, please read the Safety Precautions on page 9.
Package Contents
Make sure that the following items (in addition to any separate-orderable items that you may have purchased)
are included with your shipped device:
 2 x front-mounting brackets for 19-inch rack mounting
 1 x RJ-45-to-DB-9 serial cable adapter for serial communication
 (AC-powered models) 2 x AC power cords
 (DC-powered models) 2 x DC terminal blocks
 1 x grounding lug
 Regulatory Information document

AudioCodes MediaPack 1288 Specifications

General

Brand	AudioCodes
Model	MediaPack 1288
Category	Gateway
Language	English