AudioEngine D1 User Manual

5
The D1 can process digital audio at any bit depth up to 24 bits, and
any sample rate up to 192KHz. The D1 USB input can accept a USB
audio stream from your computer or other USB source device. The D1
optical input can accept optical (PCM stereo) streams from any optical
(TOSLINK) source, such as TVs, Apple TV®, DVD/BluRay players, CD
players, etc.
Note: optical sources must be set to PCM Stereo.
The D1 output can be connected to any gear with an analog audio
input, such as powered speakers, a boombox, stereo system, etc.
Power for the D1 is provided via the USB bus.
Note: when using the D1 with the optical output of your computer, the
USB port on the computer can provide power. The D1 will sense that
an optical input is present, and give that input priority.
USB power is “double regulated” to ensure that no USB bus power
variations aect your output.
The D1 also contains a high-performance headphone amplier.
Note: When headphones are plugged in, the analog output will be
muted.

AudioEngine D1 Specifications

General

Digital audio coaxial in	-
Digital audio optical in	1
Operating voltage	5 V
Power consumption	200 mA
Product color	Black

Weight and Dimensions

Depth	88.8 mm
Width	101.6 mm
Height	25.4 mm
Weight	500 g