Axon Body 3 Camera Battery Replacement
Last Updated: September 2019 Page 2 of 7
Torx is a trademark of Acument Intellectual Properties, LLC. AXON, Axon, and Axon Body 3 are trademarks of Axon Enterprise,
Inc., some of which are registered in the US and other countries. For more information, visit www.axon.com/legal.
All rights reserved. © 2019 Axon Enterprise, Inc. Rev A
1. Remove all 6 screws from the back panel of the Axon Body 3 Camera.
2. Remove the back cover to reveal the battery assembly.
3. Gently peel the gray PGS layer off the battery. PGS layer is attached to the battery with a small
adhesive patch near the top.