EasyManuals Logo

BCS PowerSafe 750 User Manual

BCS PowerSafe 750
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
BCS Two Wheel Tractor Power Unit
TWT/PU/0617 Page 13
Service Information
Every Week
With the machine on a level surface, check the gearbox oil level, top up as necessary using
the correct oil as listed below. The gearbox oil level should reach between the two notches
on the dipstick
(g.2,D)
.
After the First 2 Weeks or 30 Hours of Work
Replace the gearbox oil lter ONLY,
(g.1,A),
part number 58056249.
Check the gearbox oil level using the dipstick
(gs. 1 & 2, C)
, run the machine for 2-3
minutes and recheck gearbox oil level, top up as necessary using the correct oil as listed
below.
Every 100 Hours of Work or 12 Months
Change the gearbox oil by removing the gearbox drain plug
(g.3,B)
.
Replacethegearboxoillter
(g.1,A),
part number 58056249.
Cleanthegearboxdrainplugandret.
Fill gearbox using the correct oil and quantity as listed below.
Check the gearbox oil level, run the machine for 2-3 minutes and recheck gearbox oil level.
To replace the oil lter (g. 1, A)
1. Using the correct spanner, remove the
lter.
2. Smearalmofoilontherubbergasket
ofthenewlter.
3. Mount the new lter, screwing and
tightening by hand only.
Fig. 1
C
A

Other manuals for BCS PowerSafe 750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BCS PowerSafe 750 and is the answer not in the manual?

BCS PowerSafe 750 Specifications

General IconGeneral
BrandBCS
ModelPowerSafe 750
CategoryTractor
LanguageEnglish

Related product manuals