Need help?Do you have a question about the Behringer Ultragain Pro MIC2200 and is the answer not in the manual?
General| Type | Pre-amp |
|---|---|
| Proper use | Concert/Studio |
| Product color | Black, Silver |
Weight and Dimensions| Depth | 44.5 mm |
|---|---|
| Width | 217 mm |
| Height | 483 mm |
| Weight | 2300 g |
| Package weight | 3400 g |
Comprehensive guidelines for safe operation, handling, and maintenance.
Explains fundamental audio concepts like noise and dynamic range.
Discusses the product's vacuum tube stage and its audio qualities.
Describes the design and operational principles of vacuum tubes (diodes, triodes).
Details characteristics like distortion and harmonics in tube circuits.
Explains the synergy between tube and semiconductor technologies.
Discusses how tubes enhance sound in studio recordings.
Highlights the product's engineering philosophy and component choices.
Instructions for installing the unit in a standard 19" rack.
Important checks for matching the unit to local power supply voltage.
Details on making balanced and unbalanced audio connections.
Explanation of each control and switch on the front panel.
Information on the connectors and settings on the rear panel.
Step-by-step guide on using the device as a mic preamp.
Recommends initial control settings for preamp use.
How to set the input gain for optimal signal levels.
Explains the function and use of the phase reversal switch.
Details the high-pass filter for removing low-frequency noise.
Information on supplying power to condenser microphones.
Using the device to convert between different audio signal levels.
How to use the unit to balance instrument signals.
Explains the use of the parametric EQ for sound shaping.
How to use the unit for adding tube warmth and enhancing sound.
Technical details for microphone and line inputs.
Technical details for audio outputs.
Overall performance metrics like frequency response and noise.
Specifications for each control and switch.
Details on the unit's visual indicators.
Information on mains voltages, consumption, and fuses.
Physical size, weight, and shipping information.
Instructions for registering the product to activate extended warranty.
Procedures for obtaining warranty repair or replacement.
Outlines the conditions and exclusions of the warranty.
Information regarding claims for damages and liability limits.
Explains how national laws interact with warranty terms.
To Next Page
