800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
9
07/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
Operating Instructions
ZTH-GEN
The ZTH-GEN is a tool created to easily
adapt the fl ow settings for the ePIV in the
fi eld. It directly connects to the Belimo
actuator.
Technical Information
Supply 24 VAC/DC
Communication PP
Used with actuator types ARB24
GRB24
AKRB24
GKRB24
AR, GR, AK, GK Series
Use the interface on the top of the
actuator. (Leave all of the wires of
the actuator installed.)
RE-PROGRAMMING PROCESS:
Initial Screen
Connect cable to actuator port, twist to lock in place. Will
display the handheld software and hardware versions for 5
seconds then it will display the actuator being connected
Screen 1
Start ePIV process by pressing the up arrow (ESC)
The first screen displays the MFT adress, press ESC to
continue to the next screen.
CONNECTION PROCESS:
To Next Page
General